Tag Archives: shaft trailer

China Hot selling Good Quality Trailer Shaft Axle Half Axle Without Brake axle cv joint

Product Description

Company Profile

 

Hot sale product – half axle use Farm trailer 
 
Introduction of enterprise:
HangZhou Jinlibo Trade Co.,Ltd.has introduced sophisticated equipment from overseas to develop and manufacture semi-trailer axles and related parts.Holding ISO9001:2000 certification for our management system,we faithfully follow the stipulations of this standard so as to guarantee high product quality.
Characteristics:
1.Special heat-treat,low-alloy steel axle beam,it has the vitues of good synthetic performance,strong load ability and lower self weight.
2.High quality alloy solid inserted spindle,through wholy heat treatment,provide superior fatigue capability.
3.High performance premium non-asbestos brake linings,estend serbice life.
4.Easy for ABS installation.
5.Camshaft,matching with special seals,can ensure no entry of the grease into the brake drum,more safety.
6.New tight fit hub cap habe O rings,high property for sealing.
7.Grease lubricant is supplied by Mobil that lengthens the time of free maintenance.
8.Full range of stud fixing such as ISO,BSF and JAP,it can meet the requirements of various wheel rims.
Scope of our business
1.axles (German type axle,English type axle,American type axle,Spoke axle,ZM axle,Agriculture axle,Half axle,Axle without brake) 
2.Suspension (Bogie suspension,One point suspension,Rigid suspension,Spoke suspension,Machinery suspension)
3.Landing gear 
4.Fifth wheel (2”  3.5”) 
5.King pin (2”  3.5”)
6.Semi trailer
7.Other axles and related parts (Low bed axle,hub,rims,spring,drum…) 

Product Parameters

 

HALF AXLE WITHOUT BRAKE        
AXLE MODEL size of wheel stub (DIM A) WHEEL REG.DIA BEARING AXLE BEAM TRACK LENGTH OPTIONAL
WB80-275 8XM22X275 220 32211 32215 square 80 solid 500±5mm
WB70-205 6XM18X205 160 35710 35713 square 70 solid 360±5mm
WBR80-205 6XM18X205 160 32211 32215 round 80 solid 365
WBR40-112 5XM12X112 66.6 35715 35716 round 40 solid 255±5mm

Product Description

 

FAQ

Q1:Are you a factory? 
A:Yes,we are a factory,but not just a factory,as we have sales team,our own offices,and they
all can help the buyers and cooperative partners to decide which products are the best choices
for them,and all your requirements and inquires will be replyed in time.
  
Q2:What’s your Delivery Time?
A:In general, the delivery time is 15-20 days.We will make the delivery as soon as possible with
the guaranted quality.
 
Q3:What is the convenient way to pay?
A:L/C , T/T,Unionpay,DP are accepted,and if you have a better idea , please be free sharing with us.
 
Q4:Which type of shipping would be better?
A:Generally,in consideration of the cheap and safe superiorities of sea transportation,we advice
to make delivery by sea.What’s more, we respect your views of other transportation as well.
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1year
Condition: New
Axle Number: 1
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

trailer axle

How do trailer axles enhance the overall towing experience and safety?

Trailer axles play a significant role in enhancing the towing experience and safety in several ways:

  • Load Distribution: Axles are strategically positioned to distribute the trailer’s load evenly. Proper load distribution prevents swaying, fishtailing, or trailer instability, ensuring a safer towing experience.
  • Weight-Bearing Capacity: The load-bearing capacity of trailer axles is designed to handle specific weight limits. This capacity is crucial for safe towing, preventing overloading that can lead to accidents.
  • Control and Stability: Axles with adequate weight capacity and the right placement contribute to better control and stability. They minimize the risk of losing control of the trailer, especially during sudden stops or maneuvers.
  • Braking Systems: Many trailer axles are equipped with integrated brake systems or are compatible with trailer brakes. Braking systems enhance safety by allowing the driver to control the trailer’s speed and reduce braking distance.
  • Suspension: Trailer axles often feature suspension components that absorb shocks and vibrations, improving the ride quality and overall control. This minimizes the risk of cargo shifting during transit.
  • Maneuverability: Properly configured axles improve a trailer’s maneuverability, making it easier to navigate tight corners, reverse, and park. This is especially important for drivers when towing in crowded or confined spaces.
  • Adaptability: Different axle types are designed for specific applications, whether for standard road use, off-road adventures, or marine environments. Using the right axles for the intended purpose enhances safety and performance.
  • Corrosion Resistance: Trailers equipped with axles made from corrosion-resistant materials, such as galvanized or aluminum axles, are better suited for marine and coastal regions. They maintain their structural integrity and safety features even in corrosive environments.
  • Load Balance: The axles’ load-balancing capabilities contribute to better trailer balance. Proper balance prevents overloading on one side and minimizes the risk of rollovers or accidents.
  • Compliance with Regulations: Trailer axles must meet legal weight limits and safety standards. Ensuring compliance with these regulations is essential for safe and legal towing.

In summary, trailer axles are integral to a safe and enjoyable towing experience. They support load distribution, stability, control, and various safety features that prevent accidents and mishaps during towing.

trailer axle

How do brake systems and suspension components interact with trailer axles?

Brake systems and suspension components play a critical role in the overall functioning and safety of trailer axles. Their interaction ensures the trailer’s stability, handling, and stopping capabilities.

Brake Systems:

  • Function: Brake systems in trailers provide the necessary stopping force when the towing vehicle applies its brakes. The brake system on the trailer axle needs to be synchronized with the towing vehicle for smooth and efficient stopping.
  • Types: Trailers can be equipped with drum or disc brakes. Both systems rely on a controller from the towing vehicle, which applies the brakes in proportion to the towing vehicle’s deceleration.
  • Interaction with Axles: The brake systems are mounted directly on the trailer axles. As the brakes apply friction to the rotating part of the axle (either the drum or disc), the axle experiences a counter force which helps in slowing down the trailer.

Suspension Components:

  • Function: The suspension system on a trailer absorbs shocks and provides a cushioning effect, ensuring that the trailer remains stable over uneven terrains.
  • Types: Common types of trailer suspension systems include leaf spring and air suspension systems. These systems are designed to distribute the trailer’s weight evenly across its axles.
  • Interaction with Axles: Suspension components are directly connected to the trailer axles. They ensure the axles remain parallel to the ground, distributing weight and strain evenly. This not only aids in the longevity of the axle but also in the even wear of tires and brakes.

In summary, the brake systems and suspension components of a trailer are integral to its axles’ functionality and longevity. Proper maintenance and understanding of these systems are essential for safe and efficient trailer operation.

trailer axle

How do trailer axles contribute to the stability and safety of a trailer?

Trailer axles play a critical role in ensuring the stability and safety of a trailer in various ways:

1. Weight Distribution:

– Trailer axles are strategically positioned to distribute the weight of the trailer and its cargo evenly. Proper weight distribution prevents overloading on one side, reducing the risk of swaying and instability during towing.

2. Load-Bearing Capacity:

– The load-bearing capacity of trailer axles is designed to support the weight of the trailer and its contents. Properly rated axles ensure that the trailer remains stable and doesn’t become overloaded, which can lead to accidents.

3. Handling and Maneuverability:

– The alignment and suspension of trailer axles impact the trailer’s handling and maneuverability. Well-balanced axles and properly adjusted suspension contribute to predictable and safe towing, especially during turns and lane changes.

4. Braking Control:

– Many trailer axles are equipped with braking systems, which enhance the trailer’s braking control. This is crucial for maintaining a safe following distance and preventing rear-end collisions when the towing vehicle brakes.

5. Suspension Systems:

– The suspension system of trailer axles, such as leaf springs or torsion systems, helps absorb shocks and vibrations. This contributes to a smoother ride and reduces the risk of cargo shifting or damage during transit.

6. Tire Stability:

– Trailer axles support the trailer’s tires, ensuring they make even contact with the road surface. This promotes tire stability and longevity, reducing the risk of blowouts or tire-related accidents.

7. Towing Vehicle Compatibility:

– Trailer axles are selected based on the towing vehicle’s capacity. Matching the axle’s capacity to the towing vehicle’s capabilities ensures a safe and stable towing experience.

8. Anti-Sway Mechanisms:

– Some trailer axles incorporate anti-sway mechanisms to reduce trailer sway caused by external factors like wind or uneven road surfaces. These mechanisms enhance safety and control while towing.

9. Compliance with Regulations:

– Trailer axles must meet safety and weight regulations. Ensuring compliance with these standards is crucial for safe and legal trailer operation.

– In summary, trailer axles are integral to the stability and safety of a trailer. Properly maintained and correctly rated axles, along with appropriate suspension and braking systems, are essential for safe towing, preventing accidents, and protecting both the trailer and its cargo.

China Hot selling Good Quality Trailer Shaft Axle Half Axle Without Brake   axle cv jointChina Hot selling Good Quality Trailer Shaft Axle Half Axle Without Brake   axle cv joint
editor by CX 2024-05-08

China Best Sales Truck Trailer Back Shaft & Front Axle Beam axle cap

Product Description

Product parameter

General information about TND axle CO., Ltd

HangZhou TND axle CO. Ltd, is a professional manufacturer for axle and auto parts, based in HangZhou, China, we pride ourselves on pushing the boundaries of engineering excellence, and our newest line of axles is no exception. Manufactured in our state-of-the-art facility in China, each axle is crafted with precision and expertise, incorporating the latest advancements in military-grade technology.

Here are just a few key features of our axles:

Unrivaled Durability: Built to withstand the most demanding conditions, our axles are engineered to last, ensuring minimal downtime for your fleet.

Precision Engineering: Every component is meticulously designed and manufactured to exacting standards, guaranteeing optimal performance and safety.

Enhanced Efficiency: Our axles are optimized for maximum efficiency, helping you streamline operations and reduce fuel consumption.

Advanced Technology: Utilizing cutting-edge technology, our axles offer state-of-the-art features to enhance control, stability, and overall performance.

By investing in our high-tech axles, you’re not just upgrading your fleet; you’re investing in reliability, efficiency, and peace of mind.

We sincerely welcome the opportunity to discuss how our axles can benefit your business specifically. Whether you’re looking to improve performance, reduce maintenance costs, or enhance the safety of your fleet, we have the solution you need.

Usage: Suitale for all-road condition across the globe
Quality Certificate: ISO certified

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 3 Years Warranty
Condition: New
Axle Number: 1
Application: Trailer
Certification: ASTM, CE, ISO
Material: Steel
Samples:
US$ 350/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

What are the key differences between live axles and dead axles in vehicle design?

In vehicle design, live axles and dead axles are two different types of axle configurations with distinct characteristics and functions. Here’s a detailed explanation of the key differences between live axles and dead axles:

Live Axles:

A live axle, also known as a solid axle or beam axle, is a type of axle where the wheels on both ends of the axle are connected and rotate together as a single unit. Here are the key features and characteristics of live axles:

  1. Connected Wheel Movement: In a live axle configuration, the wheels on both ends of the axle are linked together, meaning that any movement or forces applied to one wheel will directly affect the other wheel. This connection provides equal power distribution and torque to both wheels, making it suitable for off-road and heavy-duty applications where maximum traction is required.
  2. Simple Design: Live axles have a relatively simple design, consisting of a solid beam that connects the wheels. This simplicity makes them durable and capable of withstanding heavy loads and rough terrains.
  3. Weight and Cost: Live axles tend to be heavier and bulkier compared to other axle configurations, which can impact the overall weight and fuel efficiency of the vehicle. Additionally, the manufacturing and maintenance costs of live axles can be lower due to their simpler design.
  4. Suspension: In most cases, live axles are used in conjunction with leaf spring or coil spring suspensions. The axle is typically mounted to the vehicle’s chassis using leaf springs or control arms, allowing the axle to move vertically to absorb bumps and provide a smoother ride.
  5. Off-road Capability: Live axles are commonly used in off-road vehicles, trucks, and heavy-duty applications due to their robustness, durability, and ability to deliver power to both wheels simultaneously, enhancing traction and off-road performance.

Dead Axles:

A dead axle, also known as a dummy axle or non-driven axle, is a type of axle that does not transmit power to the wheels. It is primarily used to provide support and stability to the vehicle. Here are the key features and characteristics of dead axles:

  1. Independent Wheel Movement: In a dead axle configuration, each wheel operates independently, meaning that the movement or forces applied to one wheel will not affect the other wheel. Each wheel is responsible for its own power delivery and traction.
  2. Weight Distribution: Dead axles are often used to distribute the weight of the vehicle more evenly, especially in cases where heavy loads need to be carried. By adding an extra axle without driving capability, the weight can be distributed over a larger area, reducing the load on other axles and improving stability.
  3. Steering: Dead axles are commonly used as front axles in vehicles with rear-wheel drive configurations. They provide support for the front wheels and allow for steering control. The steering is typically achieved through a separate mechanism, such as a steering linkage or a steering gear.
  4. Reduced Complexity: Dead axles are simpler in design compared to live axles since they do not have the additional components required for power transmission. This simplicity can lead to lower manufacturing and maintenance costs.
  5. Efficiency and Maneuverability: Dead axles are often used in vehicles where power delivery to all wheels is not necessary, such as trailers, certain types of buses, and some light-duty vehicles. By eliminating the power transmission components, these vehicles can achieve better fuel efficiency and improved maneuverability.

It’s important to note that the choice between live axles and dead axles depends on the specific application, vehicle type, and desired performance characteristics. Vehicle manufacturers consider factors such as load capacity, traction requirements, off-road capability, cost, and fuel efficiency when determining the appropriate axle configuration for a particular vehicle model.

axle

Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?

Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:

  1. Regular Inspection:
  2. Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.

  3. Lubrication:
  4. Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.

  5. Seal Inspection and Replacement:
  6. Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.

  7. Proper Loading and Towing:
  8. Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.

  9. Driving Techniques:
  10. Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.

  11. Regular Wheel Alignment:
  12. Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.

  13. Proper Tire Inflation:
  14. Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.

  15. Service Intervals:
  16. Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.

It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.

axle

Can you explain the importance of axle alignment for vehicle stability and handling?

Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:

  1. Tire Wear and Longevity:
  2. Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.

  3. Optimal Traction:
  4. Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.

  5. Steering Response and Stability:
  6. Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.

  7. Reduced Rolling Resistance:
  8. Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.

  9. Vehicle Safety:
  10. Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.

To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.

It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.

China Best Sales Truck Trailer Back Shaft & Front Axle Beam   axle capChina Best Sales Truck Trailer Back Shaft & Front Axle Beam   axle cap
editor by CX 2024-04-29

China Standard High Quantity Trailer Parts Semi Trailer Axle Shaft for Sale axle equalizer

Product Description

Product Parameters

If you have any questions, you can chat with me
Technical Parameter

Model

Max. Capacity
(T)

Total Length
(mm)

Wheel Track
(mm)

Plate spring spacing
(mm)

Brake
(mm)

Axle Tube
(mm)

Studs(mm)

P.C.D(mm)

DRGA10

10

~2215

1820

≥990

420*125

150*150

10*M22*1.5

287.75

DRGA13

13

~2115

1840

≥940

420*220

150*150

10*M27*1.5

287.75

DRGA13

13

~2185

1840

≥930

420*180

150*150

10*M20*1.5

287.75

DRGA13

13

~2185

1840

≥930

420*180

O127

10*M22*1.5

335

DRGA14

14

~2185

1850

≥930

420*220

150*150

10*M22*1.5

335

DRGA15

15

~2185

1850

≥940

420*180

O127

10*M22*1.5

335

DRGA15

15

~2185

1850

≥940

420*180

150*150

10*M22*1.5

335

DRGA16

16

~2185

1850

≥940

420*220

O127

10*M22*1.5

335

DRGA16

16

~2205

1850

≥940

420*220

150*150

10*M22*1.5

335

DRGA18

18

~2210

1850

≥940

420*220

150*150

10*M24*1.5

335

DRGA20

20

~2270

1850

≥940

420*220

150*150

10*M24*1.5

335

Noted:
1. The Trailer Axle track can be customized according to customer requirements
2. Axles can install ABS brake.
3. Axles can install Air brake chamber

Product Description

Strong one-piece or welded axle head, exceeding the industry standard for hardness and tensile strength.Stable and
reliable brake system with non-absestos brake linings.
1. Products Name: Trailer Axle Parts Standard Size 13T Axle
2. Axle Track: 1840mm
3.Axle Beam: Square 150mm/127mm Round 127mm
4. Product type:American,Germany and Europe type
5.Max.capacity you can choose:12T,13T,14T,15T,16T
6.Stud:10*M20*1.5
7.Material: Steel
8.Products Capacity Available: 13T/14T/16T/18T/20T

Detailed Photos

1. Axle Body Advantage: Axle tube is made of high-quality alloy steel with a special process, high strength and lightweight, andthe 2 ends of the tube body have good coaxially.2. Brake Advantage: Brake Shoes Holder 6 hole boring machine using 6 completed a one-time processing, high processing, high
position precision, asbestos free friction plate, in line with international environmental standards.
3. Quality Assurance:
1). The axle tube assured 1 year or 150000 km.
2). The brake assy and bearings assured 3 months.
3). The Hubs and Drums assured 6 months.

Certifications

Packaging & Shipping

FAQ

Q1. Are you a factory or trading company?  

A: Yes,we are factory, but not only factory, we also have sales team, own technical team, own after-sale workshop, can help buyers to decide which products are their suitable choice, and all your inquiry will be replyed within 24 hours.

Q2. Could you send me all your catalogues and price list?
A: Please inform me the items, size and packages you are interested in, so we can offer you the price list you need for your reference .

Q3. How does your factory do regarding quality control? 
A: Our factory has passed ISO/TS16949, CCC, DOT, ISO, CE Certificate.

Q4. What’s your Delivery Time?
A: In generally, the delivery time is 10 days-15 days after receiving payment. For large quantity it will be checked  with production dept. We will make the delivery as soon as possible with the guaranted quality.

Q5. What is payment terms?
A: L/C, T/T, Western Union, and Alibaba Trade Assurance are all accepted, and if you have better idea, please feel free to share with us.

Q6. Which documents can you supply?
A: We usually provide our customers with Commercial Invoice, Price List, Packing List, Origin Certificate, Quality/Quantity Certificate, Beneficary’s Certificate, B/L and others as your request.
You can connect with us through any contact information. Our personalized service person will respond to you within 24 hours.
We have a third-party certification agency, and each product will be certified by the relevant inspection department. Let every user buy with confidence. Once you cooperate, you become a lifelong friend! Welcome to my hometown, we have airport pick-up service and accommodation arrangements. Factory tour anytime! CZPT Truck welcomes you!

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24-Hour Tracking Service
Warranty: 12month
Type: Axle
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Order Sample

The short shaft and brake hub are both forged with
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

axle

Are there guidelines for choosing the right axle for towing heavy loads?

When it comes to towing heavy loads, selecting the appropriate axle is crucial for ensuring safe and efficient towing performance. While the specific guidelines may vary depending on the vehicle and towing requirements, there are general considerations to keep in mind when choosing the right axle. Here’s a detailed explanation of the guidelines for selecting the right axle for towing heavy loads:

Gross Axle Weight Rating (GAWR):

One of the primary factors to consider is the Gross Axle Weight Rating (GAWR) provided by the vehicle manufacturer. The GAWR specifies the maximum weight that an axle is designed to support safely. It is essential to ensure that the selected axle’s GAWR is sufficient to handle the anticipated weight of the loaded trailer and any additional cargo or passengers in the towing vehicle. Exceeding the GAWR can lead to axle failure, compromised handling, and safety risks.

Towing Capacity:

Check the towing capacity of your vehicle, which represents the maximum weight that the vehicle is rated to tow. The axle’s capacity should align with the towing capacity to ensure safe and efficient towing. Consider the type and size of the trailer you intend to tow, including its loaded weight, tongue weight, and any weight distribution considerations. The axle should be capable of handling the anticipated load without exceeding its capacity.

Matching Axle and Suspension:

The axle and suspension system work together to support the weight of the vehicle and the trailer being towed. It is important to ensure that the axle and suspension are properly matched to provide adequate support and stability. Consider the type of suspension (leaf springs, coil springs, air suspension) and the axle’s design (solid axle, independent suspension) to ensure compatibility and optimal towing performance.

Braking System:

When towing heavy loads, the braking system plays a critical role in maintaining control and safety. Ensure that the axle is equipped with appropriate brakes that can handle the increased load. Consider the type of brakes, such as electric brakes or hydraulic brakes, and their capacity to provide sufficient stopping power for the combined weight of the towing vehicle and trailer.

Weight Distribution:

Proper weight distribution is essential for safe towing. The axle should be selected based on the anticipated weight distribution between the towing vehicle and the trailer. Consider factors like tongue weight and the use of weight distribution hitches or sway control devices to ensure balanced weight distribution and optimal handling characteristics.

Consult Manufacturer Recommendations:

Always refer to the vehicle manufacturer’s recommendations, specifications, and guidelines when selecting an axle for towing heavy loads. The manufacturer’s guidelines will provide accurate and vehicle-specific information to help you make the right choice. Consult the owner’s manual or contact the manufacturer directly for any specific towing-related recommendations.

It’s important to note that towing requirements and axle specifications can vary depending on the vehicle make and model, as well as regional regulations. It is advisable to consult with automotive experts, such as mechanics or dealerships, who have expertise in towing and can provide specific recommendations based on your vehicle and towing needs.

axle

What are the symptoms of a failing CV joint, and how does it relate to the axle?

A CV (constant velocity) joint is an essential component of the axle assembly in many vehicles. When a CV joint starts to fail, it can exhibit several symptoms that indicate potential problems. Here’s a detailed explanation of the symptoms of a failing CV joint and its relationship to the axle:

Symptoms of a Failing CV Joint:

1. Clicking or popping sounds: One of the most common signs of a failing CV joint is a clicking or popping sound when making turns. This noise usually occurs during tight turns and may indicate worn-out or damaged CV joint bearings.

2. Grease leakage: A failing CV joint may leak grease, which can be seen as dark-colored grease splattered around the CV joint or on the inside of the wheel. Grease leakage is typically caused by a cracked or damaged CV joint boot, which allows the lubricating grease to escape and contaminants to enter.

3. Excessive vibration: A worn-out CV joint can cause vibrations, especially during acceleration. The vibrations may be felt in the steering wheel, floorboards, or even the entire vehicle. These vibrations can become more noticeable as the CV joint deteriorates further.

4. Difficulty in turning: As the CV joint wears out, it may become difficult to turn the vehicle, especially at low speeds or when making sharp turns. This symptom is often accompanied by a clicking or popping sound.

5. Uneven tire wear: A failing CV joint can lead to uneven tire wear. If the CV joint is damaged or worn, it can cause the axle to wobble or vibrate, resulting in uneven tire tread wear. This can be observed by visually inspecting the tires and noticing uneven patterns of wear.

Relationship to the Axle:

The CV joint is an integral part of the axle assembly. It connects the transmission to the wheels and allows smooth power delivery to the wheels while accommodating the up-and-down motion of the suspension. The axle shaft is responsible for transmitting torque from the transmission to the CV joints and ultimately to the wheels.

Axles contain one or more CV joints, depending on the vehicle’s drivetrain configuration. In front-wheel drive vehicles, each front axle typically has two CV joints, one inner and one outer. Rear-wheel drive and all-wheel drive vehicles may have CV joints on both the front and rear axles.

The CV joint consists of a joint housing, bearings, and internal ball bearings or rollers. It is protected by a rubber or thermoplastic CV joint boot, which seals in the grease and protects the joint from contaminants. When the CV joint fails, it can affect the axle’s ability to transmit power smoothly and result in the symptoms mentioned above.

Regular inspection and maintenance of the CV joint and axle assembly are crucial to identify and address any issues promptly. If any of the symptoms mentioned earlier are observed, it is recommended to have the vehicle inspected by a qualified mechanic to determine the exact cause and perform necessary repairs or replacements.

axle

What are the factors to consider when choosing an axle for a custom-built vehicle?

Choosing the right axle for a custom-built vehicle is crucial for ensuring optimal performance, durability, and safety. Here are several key factors to consider when selecting an axle for a custom-built vehicle:

  1. Vehicle Type and Intended Use:
  2. Consider the type of vehicle you are building and its intended use. Factors such as vehicle weight, power output, terrain (on-road or off-road), towing capacity, and payload requirements will influence the axle selection. Off-road vehicles may require axles with higher strength and durability, while performance-oriented vehicles may benefit from axles that can handle increased power and torque.

  3. Axle Type:
  4. Choose the appropriate axle type based on your vehicle’s drivetrain configuration. Common axle types include solid axles (live axles) and independent axles. Solid axles are often used in heavy-duty applications and off-road vehicles due to their robustness and ability to handle high loads. Independent axles offer improved ride quality and handling characteristics but may have lower load-carrying capacities.

  5. Weight Capacity:
  6. Determine the required weight capacity of the axle based on the vehicle’s weight and intended payload. It’s crucial to select an axle that can handle the anticipated loads without exceeding its weight rating. Consider factors such as cargo, passengers, and accessories that may contribute to the overall weight.

  7. Axle Ratio:
  8. Choose an axle ratio that matches your vehicle’s powertrain and desired performance characteristics. The axle ratio affects the torque multiplication between the engine and wheels, influencing acceleration, towing capability, and fuel efficiency. Higher axle ratios provide more torque multiplication for improved low-end power but may sacrifice top-end speed.

  9. Braking System Compatibility:
  10. Ensure that the chosen axle is compatible with your vehicle’s braking system. Consider factors such as the axle’s mounting provisions for brake calipers, rotor size compatibility, and the need for an anti-lock braking system (ABS) if required.

  11. Suspension Compatibility:
  12. Consider the compatibility of the chosen axle with your vehicle’s suspension system. Factors such as axle mounting points, suspension geometry, and overall ride height should be taken into account. Ensure that the axle can be properly integrated with your chosen suspension components and that it provides sufficient ground clearance for your specific application.

  13. Aftermarket Support:
  14. Consider the availability of aftermarket support for the chosen axle. This includes access to replacement parts, upgrade options, and technical expertise. A robust aftermarket support network can be beneficial for future maintenance, repairs, and customization needs.

  15. Budget:
  16. Set a realistic budget for the axle selection, keeping in mind that high-performance or specialized axles may come at a higher cost. Balance your requirements with your budget to find the best axle option that meets your needs without exceeding your financial limitations.

When choosing an axle for a custom-built vehicle, it’s recommended to consult with knowledgeable professionals, experienced builders, or reputable axle manufacturers. They can provide valuable guidance, assist in understanding technical specifications, and help you select the most suitable axle for your specific custom vehicle project.

China Standard High Quantity Trailer Parts Semi Trailer Axle Shaft for Sale   axle equalizerChina Standard High Quantity Trailer Parts Semi Trailer Axle Shaft for Sale   axle equalizer
editor by CX 2024-04-22

China OEM 13 Ton German Axle for Heavy-Duty Trailers or Semi-Trailers BPW Trailer Axle German Type Axle axle shaft

Product Description

Product Description

A trailer axle is an essential component that connects the trailer wheels to the vehicle’s chassis. The axle’s primary function is to transfer the load from the trailer to the wheels and ultimately to the road surface.
Axles are designed with specific load capacity and are selected based on the weight of the trailer and the expected load. There are different types of axles available, including single, tandem, and tri-axle configurations, with each designed to support a varying amount of weight.
Axle alignment is critical to ensure proper handling and safe operation of the trailer. Factors such as suspension type, brake configuration, and tire size must also be considered when selecting and configuring the trailer axle.
Proper maintenance of the axle, including lubrication, inspection, and alignment checks, is crucial to ensure safe and reliable operation of the trailer.

Axle Type           L4 Wheer Fixing           Bearing
Max L2   L3   GM Center Studs      L1  Rimis  Axle
Capacity Track Brake Size Center Axle Tube Distance D1 D2 Total Recommended Weight
(T) (mm) (mm) Distance of (mm) of Brake P.C.D. Hole Length to use (kg)
      Spring Seat   Chamber (mm) Diameter (mm)    
      (mm)   (mm)   (mm)      
CK12FB03G1DE 12 1840 ∈420×180 ≥940 150x150x12 440 10-M22x1.5 335 281 2172 7.5V-20 380 (Ouer)33213(lnner)33118
CK13FB03G2DE 13 1840 ∈420×200 ≥940 150x150x12 375 10-M22x1.5 335 281 2170 7.5V-20 381
CK14FB03G2FG 14 1860 ∈420×200 ≥950 150x150x14 380 10-M22x1.5 335 281 2222 8.00V-20 412 (Outer)33215 dnneri32219
CK16FB0GG2HI  16 1860 ∈420×200 ≥950 150x150x16 380 10-M22x1.5 335 281 2293 8.50V-20 439 (Outer)32314(lnner)32222
CK18FBC3GHI 18 1860 ∈420×220 ≥950 150x150x18 380 10-M22x1.5 335 281 2293 8.50V-20 454  (Outer)32314(lnner)32222

1. One-piece shaft tube, high strength, comfortable appearance.
2. Compared with other axles of the same load, it is light in weight and low in price. 
3. Using non-asbestos friction plate, more environmentally friendly.
4. Adopting international general specifications, maintenance is convenient, fast and low cost.

Product Name

Trailer Rear Axle

Type

American drum type

Capacity

13T, 15T, 16T, 20T

Total Length

About 2200 mm (According to the model)

Weight

About 380 KG (According to the model)

Material

Iron

Color

Black

Package

Carton, wooden  box

Quality

Super

Port

China Port

Payment

T/T, L/C, D/P, D/A, MoneyGram, Credit Card, PayPal, Western Union

Service

OEM, ODM

Accessories
It adopts high-quality accessories from major brands at home and abroad, and global standard American
axle specifications. It has strong practicability, low price and convenient maintenance.
Axle
The factory produces its own shaft tube with quality assurance and cost advantage. The assembly process
strictly abides by international quality standards to create high-quality products.

 

 

Recommended Products

Company Profile

Nanou Company Co., Ltd. is a special trailer manufacturer located in Quanpu Industrial Park, Xihu (West Lake) Dis., ZheJiang Province.

The company is located in the famous Water Marginh hometown, east of ZheJiang -HangZhou Grand Canal, west of ZheJiang -Kowloon Railway, south of HangZhou, the hometown of peony, north of Yellow River, near the exit of National Highway 220 Jinhe Expressway, with convenient transportation and pleasant scenery.

We are the full-size Modified Truck enterprise which integrates the design of product, scientific research developing, production and sale together, possessing subsidiary companies of automobile production, automobile trade and automobile fittings production, etc. Our leading products include “Nanou” brand semi-trailers, tipper, fuel tanker, particle material tanker, bulk cement tanker, concrete mixer truck, wrecker trucks, LNG, CNG, and other special vehicles.

We strictly adhere to the service idea of customer centricity and customer satisfaction, so as to provide customers with better and faster CZPT service.

Over the years, we have always adhered to the business strategy of “innovation, development” and the concept of “quality is the life of the enterprise, talent is the foundation of the enterprise, customer is the god of the enterprise, management is the soul of the enterprise”.

Now, Nanou trailers are widely exported to most Africa market (such as Algeria, Zimbabwe, Ethiopia, Kenya, Nigeria, Sudan, Malawi, Tanzania, Cameroon, Ghana, Qatar)and Dubai, Saudi Arabia, Iran, Malaysia, Philippines, Vietnam, Pakistan, Russia, and Central& South America market.

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.

We are looking forward to forming successful business relationships with new clients around the world in the near future.

WHY CHOOSE US?

1. Advanced equipment, the use of precision CNC spinning machine automatic molding, surface spiral marks uniform, beautiful, shape in line with Europe, the United States popular style, with good “dynamic balance” performance.

2. Our company has 7 rim production lines, including 4 steel rim production lines and 3 tubeless rim production lines. Tubeless rim forming, using slagging, rolling and end cutting 3 processes independently completed. On-line test tire mounting surface size, to ensure the quality of the rim. Rim gas seal checked.

3. Our company has 5 wheel assembly lines, which can ensure the accuracy of CZPT steel rings through four-point detection device. Assembly welding using the original imported American Lincoln welding machine automatic welding. Make full use of imported German SAXON dynamic balance detection device to realize online full check wheel dynamic balance.

4. The company has 3 coating production lines, which carry out automatic oil removal and rust removal on the surface of the steel ring, and cover the outer layer with dense phosphating film to enhance the corrosion resistance of the coating.

5, the outer coating according to your needs, choose paint coating or powder coating. PPG coating is selected for paint coating, and Wagna spraying system of the world famous brand is selected for powder coating equipment. Valspar brand is selected for powder coating. The finished wheel is regularly tested by salt spray test for 720 hours. Coating quality to reach the international first-class level.

Packaging & Shipping

FAQ

A. What are our advantages compared with other manufacturers

  • Competive Price – We work as the leading dealers of various leading China Semi Trailers manufacturers/factories.From numerous comparison and feedback from clients, our price is more competitive than manufacturers/factories.
  • Quick Response – Our team is consisted of a group of diligent and enterprising people, working 24/7 to respond client inquiries and questions all the time. Most problems can be solved within 12 hours.
  • Fast Delivery – Normally it will take more than 25-45 days for manufacturers/ factories to produce the ordered trailers, while we have a variety of resources, locally and nation widely, to receive trailers in timely manner. In 80% circumstance, we can have a 15-20 days delivery of regular trailers for our clients.
  • High Quality – Every process of choose material ,welding ,sand blasting,painting with detailed inspection,accept 100% inspection during production and after production.

B. Which payment terms can we accept?

  • Normally we can work on T/T term or L/C term.
  • On T/T term, 30% down payment is required in advance, 70% balance shall be settled before delivery, or against the copy of original B/L for regular client.
  • On L/C term, normally need 30% down payment by T/T, 70% by L/C at sight. a 100% irrevocable L/C without “soft clauses” can be accepted sometimes. Please seek the advice from the individual sales manager whom you work with.

C. How long will our price be valid?

  • Price with long valid time — We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year. We only adjust our price based on 2 situations: The rate of USD:RMB varies significantly according to the international currency exchange rates. Manufacturers/factories adjusted the trailer price, because of the increasing labor cost and raw material cost.

D. What logistics ways we can work for shipment?

  • We can ship all trailer by various transportation tools.
  • For 90% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc, either by container or RoRo/Bulk Shipment.
  • For neighborhood countries of China, such as Russia, Tajikistan, Kazakhstan,Mongolia etc, we can ship trucks by road or railway.
  • For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24h Online
Warranty: 1~2 Years
Type: Axle
Certification: ISO/TS16949, CE
Loading Weight: 15T
Color: Customer Demands
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

trailer axle

How do innovations in axle technology impact trailer design and towing?

Innovations in axle technology have a profound impact on trailer design and towing capabilities. These advancements lead to improved performance, safety, and efficiency in the following ways:

  • Weight Reduction: Advanced materials and manufacturing processes result in lighter yet durable axles, reducing the overall weight of trailers. Lighter trailers require less fuel to tow and can carry more payload within legal weight limits.
  • Increased Load Capacity: Innovations like stronger axle materials and better load distribution systems allow trailers to carry heavier payloads while maintaining stability and safety.
  • Suspension Enhancements: Axle technology improvements often go hand in hand with suspension innovations, providing smoother rides, better handling, and enhanced shock absorption. This is particularly valuable for cargo protection and driver comfort.
  • Improved Durability: Enhanced axle components and coatings contribute to increased durability, reducing maintenance and replacement costs over the trailer’s lifespan.
  • Safety Features: Innovations in axle technology can include safety features like integrated braking systems, anti-lock brakes, and sensors for monitoring axle performance and load conditions.
  • Fuel Efficiency: Reduced weight and improved aerodynamics, often influenced by axle design, result in better fuel efficiency, reducing operating costs for fleet owners and individual haulers.
  • Tire Wear Reduction: Axle advancements can lead to more even weight distribution on tires, reducing wear and extending tire lifespan. This not only saves money but also enhances safety on the road.
  • Environmental Impact: Lighter and more fuel-efficient trailers have a smaller carbon footprint, contributing to reduced emissions and environmental benefits.
  • Towing Stability: Axle innovations can improve trailer stability, reducing the risk of sway and rollovers, especially in adverse weather conditions.
  • Adaptability: Many advanced axles allow for easy adaptation to various trailer types, making them versatile for different hauling needs.

Overall, innovations in axle technology play a crucial role in advancing the trailer industry. They provide economic, environmental, and safety benefits, making trailers more efficient, durable, and versatile for a wide range of towing applications.

trailer axle

How does a tandem or multi-axle setup compare to a single trailer axle?

A tandem or multi-axle setup on a trailer offers several advantages and differences when compared to a single trailer axle:

1. Weight Distribution:

– Tandem or multi-axle setups distribute the trailer’s weight more evenly across multiple axles. This results in better weight distribution and reduced strain on individual axles and tires, minimizing the risk of overloading.

2. Improved Load Capacity:

– Tandem and multi-axle configurations can typically carry heavier loads than single axles. This is especially important for heavy or oversized cargo.

3. Enhanced Stability:

– Additional axles provide greater stability and control. They help reduce swaying, improve tracking, and enhance the trailer’s overall stability, especially at high speeds or when navigating curves.

4. Reduced Tire Wear:

– Tandem axles distribute the weight more evenly, reducing tire wear compared to a single axle. This results in longer tire life and cost savings.

5. Better Traction:

– Multi-axle setups provide improved traction, which is beneficial for off-road or adverse weather conditions, such as snow, mud, or ice.

6. Braking Efficiency:

– Tandem axles can improve braking efficiency due to increased brake pad contact with the road surface. This enhances safety by reducing stopping distances.

7. Handling and Maneuverability:

– While multi-axle setups offer stability, they can be less maneuverable than single axles, particularly in tight spaces. Drivers may need more room to make turns or park.

8. Maintenance:

– Tandem and multi-axle configurations require more maintenance and attention to ensure all axles are properly aligned, balanced, and maintained. This can increase operating costs.

9. Cost:

– Multi-axle trailers are typically more expensive to purchase and maintain than single-axle trailers. However, the increased load capacity and stability can outweigh the initial cost difference for specific applications.

10. Legal Considerations:

– Regulations regarding axle configurations, weight limits, and axle spacing can vary by region. It’s important to comply with local laws when using tandem or multi-axle setups.

In summary, tandem or multi-axle setups are advantageous for heavy or large loads, providing better weight distribution, stability, and load capacity. However, they require increased maintenance and may be less maneuverable in some situations. The choice between single and multi-axle trailers depends on the specific hauling needs, legal requirements, and budget considerations.

trailer axle

What are the components of a trailer axle assembly and their functions?

A trailer axle assembly consists of several key components, each with specific functions:

1. Axle Beam:

– The axle beam is the central load-bearing component. It supports the trailer’s weight and distributes it to the wheels. The axle beam is the main structural element of the assembly.

2. Spindles:

– Spindles are the attachment points for the wheels. They connect the wheels to the axle beam, allowing them to rotate. Properly lubricated spindles ensure smooth wheel movement.

3. Hubs and Bearings:

– Hubs are the wheel-mounting components, and bearings allow the wheels to rotate freely. These components are crucial for reducing friction and maintaining wheel movement.

4. Brakes (Optional):

– Some trailer axles are equipped with brakes, including electric or hydraulic systems. Brakes help the trailer come to a controlled stop and enhance safety during towing.

5. Suspension System:

– The suspension system, which can be leaf springs, torsion axles, or air suspension, absorbs shocks and vibrations, ensuring a smoother ride and protecting the trailer’s cargo.

6. U-Bolts and Plates:

– U-bolts secure the axle assembly to the trailer’s frame using axle plates. They ensure proper alignment and stability of the axle assembly.

7. Mounting Hardware:

– Various nuts, bolts, and washers are used to secure components in the axle assembly, ensuring they remain in place during operation.

8. Axle Beam Brackets:

– These brackets provide additional support and structural integrity to the axle beam, helping distribute weight evenly and reduce stress on the axle.

9. Wiring and Connectors (Optional):

– If the axle assembly includes brakes, it may also have wiring and connectors for brake activation. These components allow the trailer’s braking system to communicate with the towing vehicle.

– In summary, the components of a trailer axle assembly work together to support the trailer’s weight, facilitate wheel movement, provide braking capabilities (if equipped), and ensure a smooth and stable ride. Proper maintenance of these components is essential for safe and reliable trailer operation.

China OEM 13 Ton German Axle for Heavy-Duty Trailers or Semi-Trailers BPW Trailer Axle German Type Axle   axle shaftChina OEM 13 Ton German Axle for Heavy-Duty Trailers or Semi-Trailers BPW Trailer Axle German Type Axle   axle shaft
editor by CX 2024-04-17

China high quality Hot Sell Built-in Brake American Type Axle for Trailer Factory Customize axle shaft

Product Description

Product Description

Name Heavy Duty Axle for Trailer
Track 1840mm/1850mm
Material Steel
Features Competitive Price with High Quality, OEM-DIY
MOQ 1
Certification CCC, ISO
Brand Yahua StHangZhouk
Warranty 6 month
OEM Accepted

ZheJiang StHangZhouk International Trading Co., Ltd. is an international trading company under ZheJiang Yahua Machinery Manufacturing Co., Ltd. 

We have manufacture of our own and we are mainly engaged in various types of semi-trailer axles, semi-trailer landing gears, suspension systems and accessories. Our main markets include Europe, Southeast Asia, the Middle East and mainland China.

Our company insists on our business spirit of “Customers As Gods, Quality As Top”. We are increasingly expanding our international market share based on quality products, excellent services, reasonable prices and timely delivery. Please contact us at any time for more information.

We will treasure each opportunity to cooperate with you. We will use our Sincerity and Good Quality to win your trust!

Q1. What is your terms of packing?
A: Generally, we will package it with fumigation-free wooden holder in brown boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: FOB, CIF, DDU, EXW, DAP.

Q4. How about your delivery time?
A: Generally, it will take 5 to 10 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24h
Warranty: 6 Months
Type: Axle
Certification: ISO/TS16949, CCC, ISO
Loading Weight: 8t/13t/13t/15t/16t/20t/25t
ABS: Customizable
Samples:
US$ 380/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

trailer axle

Can you explain the impact of trailer axle size and construction materials on performance?

The size and construction materials of trailer axles have a substantial impact on the overall performance of a trailer. Here’s how they influence performance:

  • Axle Size: The size, particularly the load-carrying capacity, of the axles directly affects the trailer’s ability to transport heavy loads. Larger axles with higher weight ratings can handle greater cargo, improving performance in terms of payload capacity.
  • Material Durability: The construction materials of axles, such as steel or aluminum, impact their durability and resistance to corrosion. Steel axles are robust and cost-effective, suitable for various applications. Aluminum axles are lightweight and resistant to rust, making them ideal for marine or corrosive environments.
  • Weight Distribution: The size of axles also influences weight distribution. Proper weight distribution across the axles is essential for stability and control. Well-sized axles ensure that weight is evenly spread, enhancing performance during towing.
  • Off-Road Performance: In off-road or rough terrain applications, larger axles with sturdy construction are preferred. They offer better ground clearance and durability, ensuring that the trailer can handle uneven surfaces effectively.
  • Lightweight Performance: For lightweight trailers, smaller axles or those made of lightweight materials like aluminum can improve fuel efficiency and reduce the overall weight of the trailer. This is crucial for small utility or recreational trailers.
  • Cost and Maintenance: The choice of axle size and material impacts the initial cost and long-term maintenance. Steel axles are generally more cost-effective but may require more maintenance to prevent rust. Aluminum axles are initially more expensive but offer long-term cost savings due to their resistance to corrosion.
  • Braking and Suspension: Larger axles may accommodate more robust braking systems and advanced suspension, further enhancing performance in terms of safety, control, and ride comfort.

In summary, the size and construction materials of trailer axles are critical factors in determining a trailer’s performance. The right choice depends on the trailer’s intended use, load capacity, and environmental conditions.

trailer axle

Can you explain the importance of properly balancing a trailer axle load?

Properly balancing a trailer axle load is crucial for several reasons:

1. Weight Distribution:

– Balancing the load ensures that weight is evenly distributed across the trailer’s axles. This prevents overloading on specific axles, which can lead to safety issues and potential fines for exceeding weight limits.

2. Trailer Stability:

– Balanced loads contribute to better stability during towing. An imbalanced load can cause the trailer to sway, making it difficult to control and potentially leading to accidents.

3. Tire Wear:

– When a trailer is unbalanced, some tires bear more weight than others. This uneven weight distribution results in uneven tire wear, reducing tire lifespan and increasing maintenance costs.

4. Braking Efficiency:

– Balanced loads improve braking efficiency. If the weight is concentrated on one side of the trailer, it can affect the trailer’s ability to stop safely and quickly.

5. Fuel Efficiency:

– Properly balanced loads reduce drag and improve fuel efficiency. An imbalanced trailer creates more resistance and increases fuel consumption during towing.

6. Handling and Control:

– A balanced load makes it easier to control the trailer and reduces the risk of accidents or rollovers, especially during sharp turns or emergency maneuvers.

7. Legal Compliance:

– Many regions have strict regulations regarding axle weight limits and load distribution. Failure to comply with these regulations can result in fines and penalties.

8. Towing Vehicle:

– Imbalanced loads can affect the towing vehicle’s stability and handling. It places additional strain on the vehicle’s suspension, tires, and brakes.

9. Cargo Protection:

– Balancing the load helps protect the cargo. An imbalanced load can shift during transit, potentially causing damage to the goods being transported.

10. Safety:

– Proper load balance enhances overall road safety. It reduces the risk of accidents, ensures the safety of other road users, and promotes safe towing practices.

In summary, balancing a trailer axle load is critical for safety, legal compliance, and the efficient operation of both the trailer and towing vehicle. It contributes to stability, even tire wear, and overall road safety. Trailer owners and operators should always ensure that loads are properly balanced and within legal weight limits.

trailer axle

Can you explain the various types of trailer axles and their applications?

Trailer axles come in various types, each designed for specific applications. Here’s an explanation of the common types and their uses:

1. Single Axle:

– Single axles have a single wheel on each side of the axle. They are often used in small utility trailers, boat trailers, and lightweight cargo trailers. Single axles are simple and cost-effective but may have limited load-carrying capacity.

2. Tandem Axle:

– Tandem axles consist of two axles placed side by side. They are commonly found in larger trailers, such as enclosed cargo trailers, car haulers, and camper trailers. Tandem axles offer increased stability and weight-carrying capacity.

3. Triple Axle:

– Triple axles feature three axles in close succession. They are used in heavy-duty and specialized trailers like large cargo trailers, mobile homes, and industrial transport trailers. Triple axles provide exceptional load capacity and stability.

4. Drop Axle:

– Drop axles are used to lower the trailer deck for easier loading and unloading. They are often seen in utility and equipment trailers. Drop axles are ideal for transporting vehicles and equipment with a low ground clearance.

5. Idler Axle:

– Idler axles do not have brakes and are used on lightweight or small trailers where braking is not required. They are commonly found in landscaping trailers, small utility trailers, and some boat trailers.

6. Brake Axle:

– Brake axles are equipped with brakes to enhance stopping power and safety. They are used in trailers that carry heavier loads, such as enclosed cargo trailers, horse trailers, and RVs.

7. Straight Axle:

– Straight axles have a fixed, straight orientation and are common in most trailer types. They provide a simple design and are suitable for a wide range of applications.

8. Torflex Axle:

– Torflex axles use a rubber torsion suspension system, offering a smoother ride and improved load equalization. They are used in lightweight cargo trailers, horse trailers, and RVs.

9. Adjustable Axle:

– Adjustable axles have a movable spindle, allowing the trailer owner to adjust the ride height based on specific needs. These are commonly used in boat trailers, where submerging the trailer in water requires height adjustments.

– In summary, the choice of trailer axle type depends on the trailer’s intended use, load capacity, and specific requirements. Understanding the different axle types and their applications is essential for selecting the right axle for your trailer.

China high quality Hot Sell Built-in Brake American Type Axle for Trailer Factory Customize   axle shaftChina high quality Hot Sell Built-in Brake American Type Axle for Trailer Factory Customize   axle shaft
editor by CX 2024-04-15

China Standard Trailer Axle Shaft Spring Axles with 2000-2200lbs 4 Lug or 5 Lug Hub wheel and axle

Product Description

HangZhou Hongri Machinery Manufacture Co., Ltd
 

 

Product Description

Trailer Axle/Hub

 

Production Workshop

 

Product Parameters

Packaging & Shipping

 

Packing:
Normal packing or According to your requirement.
Safe, complete and fast delivery of goods to customers.

Shipping: By sea

Payment Terms: T/T

Company Profile

Business type Manufacture
Location Shiliwang Industrial Zone of HangZhou, ZheJiang ,China
Year Established 2003
Occupied area 50 Acres
Company certification CE, ISO9001,SGS
Main product disc harrow, disc plough, trailer, boom sprayer , rotary tillers, potato planter ,plowing blade, plough blade, soil-loosening shovel and so on. With good quality, excellent performance, our products annually export to countries around the world, and we have gained the majority of customers trust.

 

After Sales Service

After Service: 12 months guarantee of the main parts, we will send the guarantee parts together with the machine in your next order or we can send them by air express if you need it urgently.

 

FAQ

1.Q: Full price list for these products

A: If you need the price list for these products, please notify the product model so that I can quote you accordingly. Please understand we have a very wide product range, we don’t usually offer full products price list.

2. Q: Business terms
A: Shipment time: 25-40days after your payment
Shipment: By sea
Loading port: HangZhou port, China
Destination port: …To be advised
Payment: T/T
Warranty: 1 year

3.Q:How can I order from you?
A: Please send us your enquiry list; we will reply you within 2 working days.

4.Q:If the finger I look for are not in your catalogue, what should I do?
A: We can develop it according to your drawing or sample.

5. Q: Why choose Hongri for cooperation?
A: Comparing with our competitors, we have much more advantages as follows:
– More than 30years in manufacturing farming machine
– More Professional Sales staffs to guarantee the better service
– More agri machines for your choice
– More New products into your range to avoid price competition
– Larger quantity production and shipment
– Better quality to guarantee better Credit.
– Faster delivery time: Only7days
– More stick quality checking before shipment.
– More reasonable after-sales service terms.
– More famous brand: Hongri” brand and “CE”ceitification.
– Lower repair rate and bad review rate
– We have American Branch to show our main products. We can give customers best service.

Please feel free to contact me if you have any questions.
Thanks. Have a nice day!

 

Contact me

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Trailer
Certification: CE
Material: Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

trailer axle

What are the legal regulations or guidelines regarding trailer axle weight limits?

Trailer axle weight limits are subject to legal regulations that vary by region and are designed to ensure road safety and preserve infrastructure. Here are some common guidelines:

  • Maximum Weight Limits: Most regions specify the maximum allowable weight on a single axle, tandem axles, or multi-axle configurations.
  • Gross Vehicle Weight Rating (GVWR): Trailers are assigned a GVWR, indicating the maximum weight they can legally carry, including cargo and the trailer’s own weight.
  • Per-Axle Weight Limits: Legal limits restrict the weight any single axle or axle group can carry. These limits can vary by axle spacing.
  • Weight Distribution: Regulations often require proper weight distribution between axles to prevent overloading a particular axle.
  • Permits for Oversized Loads: Transporting loads exceeding standard weight limits may require special permits and adherence to specific regulations.
  • Axle Spacings: Legal restrictions may govern the distance between axles or axle groups, affecting weight distribution.
  • Tire Load Ratings: Trailer tires must meet or exceed the expected load, and tire ratings impact weight limits.
  • State and Local Regulations: In the United States, weight limits can vary by state and locality, so it’s important to be aware of and comply with local laws.

It’s crucial for trailer owners and operators to understand and adhere to these regulations to ensure safe and legal operation. Non-compliance can result in fines, road safety hazards, and damage to roads and bridges.

trailer axle

What are the key considerations when selecting the right trailer axle for a specific application?

Choosing the appropriate trailer axle for a specific application involves several critical considerations:

  1. Weight Capacity: Determine the maximum weight the axle will need to support. This includes the trailer’s payload and the weight of the trailer itself. Ensure the selected axle has a weight capacity that exceeds the application’s requirements to provide a safety margin.
  2. Axle Type: Select the axle type based on the application. Common types include straight axles, drop axles, and torsion axles. The choice depends on factors like ground clearance, load height, and suspension design.
  3. Axle Configuration: Decide on the number of axles needed. Single axles are suitable for lighter loads, while tandem and tri-axle configurations offer higher weight capacities. Multi-axle setups provide better weight distribution.
  4. Suspension Type: Choose the appropriate suspension system, such as leaf spring, air ride, or torsion suspension. The suspension affects ride quality, load stability, and maintenance requirements.
  5. Brake System: Consider the braking requirements. Larger and heavier trailers often require electric or hydraulic brakes. Ensure the axle accommodates the necessary brake system, including the brake size and type.
  6. Axle Material: Select the axle material, typically steel or aluminum. Steel axles are durable and cost-effective, while aluminum axles are lighter and corrosion-resistant. The choice depends on the application’s demands and budget.
  7. Hub and Spindle Type: Choose hubs and spindles compatible with the axle. The hub style affects the type of wheel and tire you can use, while spindle size impacts weight capacity and bearing compatibility.
  8. Wheel Bolt Pattern: Ensure the axle’s hub and wheel bolt patterns match to avoid compatibility issues with the wheels and tires you plan to use.
  9. Ground Clearance: Consider the required ground clearance for the application. Lower ground clearance may be suitable for highway travel, while off-road or specialty trailers may need increased clearance.
  10. Legal Compliance: Ensure that the selected axle and trailer configuration comply with local and national regulations regarding weight limits, axle spacing, and safety requirements.
  11. Manufacturer and Warranty: Choose a reputable axle manufacturer with a track record for quality and durability. Check the warranty and support offered by the manufacturer.
  12. Budget: Evaluate the budget constraints for the axle and select an option that balances cost-effectiveness with meeting the application’s needs.

By carefully considering these factors, you can select the right trailer axle that ensures safe and efficient performance for your specific application.

trailer axle

What are the components of a trailer axle assembly and their functions?

A trailer axle assembly consists of several key components, each with specific functions:

1. Axle Beam:

– The axle beam is the central load-bearing component. It supports the trailer’s weight and distributes it to the wheels. The axle beam is the main structural element of the assembly.

2. Spindles:

– Spindles are the attachment points for the wheels. They connect the wheels to the axle beam, allowing them to rotate. Properly lubricated spindles ensure smooth wheel movement.

3. Hubs and Bearings:

– Hubs are the wheel-mounting components, and bearings allow the wheels to rotate freely. These components are crucial for reducing friction and maintaining wheel movement.

4. Brakes (Optional):

– Some trailer axles are equipped with brakes, including electric or hydraulic systems. Brakes help the trailer come to a controlled stop and enhance safety during towing.

5. Suspension System:

– The suspension system, which can be leaf springs, torsion axles, or air suspension, absorbs shocks and vibrations, ensuring a smoother ride and protecting the trailer’s cargo.

6. U-Bolts and Plates:

– U-bolts secure the axle assembly to the trailer’s frame using axle plates. They ensure proper alignment and stability of the axle assembly.

7. Mounting Hardware:

– Various nuts, bolts, and washers are used to secure components in the axle assembly, ensuring they remain in place during operation.

8. Axle Beam Brackets:

– These brackets provide additional support and structural integrity to the axle beam, helping distribute weight evenly and reduce stress on the axle.

9. Wiring and Connectors (Optional):

– If the axle assembly includes brakes, it may also have wiring and connectors for brake activation. These components allow the trailer’s braking system to communicate with the towing vehicle.

– In summary, the components of a trailer axle assembly work together to support the trailer’s weight, facilitate wheel movement, provide braking capabilities (if equipped), and ensure a smooth and stable ride. Proper maintenance of these components is essential for safe and reliable trailer operation.

China Standard Trailer Axle Shaft Spring Axles with 2000-2200lbs 4 Lug or 5 Lug Hub   wheel and axleChina Standard Trailer Axle Shaft Spring Axles with 2000-2200lbs 4 Lug or 5 Lug Hub   wheel and axle
editor by CX 2024-04-09

China Custom Trailer Axle American Type Axle Container Trailer axle shaft

Product Description

American type inboard axle for trailer

High quality & best price
CE: ISO9 20” S150 13T ≤450 1840mm 372KG KMM1320I 420*2 20” S150 13T  ≤450 1840mm 385KG KMM1322I 420*220 ISO 10*M22*335 281 745 518445 518445 20” S150 13T  ≤450 1840mm 408KG KMM1318Q 420*180 JAP 8*M20*285 221 725 518445 518445 20” S150 13T  ≤450 1840mm 372KG KMM1318J 420*180 JAP 8*M20*285 221 725 518445 518445 20” S150 13T  ≤450 1840mm 372KG KMM1622I 420*220 ISO 10*M22*335 281 748 518445 220149 20” S150 16T  ≤450 1850mm 430KG KMM1620I 420*2 20” S150 16T  ≤450 1850mm 420KG KMM1618I 420*180 ISO 10*M22*335 281 728 518445 220149 20” S150 15T  ≤450 1850mm 415KG KMMR1318I 420*180 ISO 10*M22*335 281 725 518445 518445 20” R127*19 13T  ≤450 1840mm 372KG KMMR1320I 420*2 20” R127*19 13T  ≤450 1840mm 385KG KMMR1322I 420*220 ISO 10*M22*335 281 745 518445 518445 20” R127*19 13T  ≤450 1840MM 408KG KMMR1318J 420*180 JAP 8*M20*285 221 725 518445 518445 20” R127*19 13T  ≤450 1840mm 372KG KMMR1318IQ 420*180 ISO 10*M22*285.75 221 725 518445 518445 20” R127*19 13T  ≤450 1840mm 372KG KMMR1622I 420*220 ISO 10*M22*335 281 748 518445 220149 20” R127*25 16T  ≤450 1850mm 430KG KMMR1620I 420*2 20” R127*25 16T  ≤450 1850mm 420KG KMMR1618I 420*180 ISO 10*M22*335 281 728 518445 220149 20” R127*25 15T  ≤450 1850mm 415KG

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Axle Number: 1
Application: Truck
Certification: ISO
Material: Steel
Type: Semi-Trailer
Customization:
Available

|

Customized Request

trailer axle

Are there specific challenges or maintenance practices for boat trailer axles?

Boat trailer axles come with unique challenges and maintenance requirements due to their exposure to marine environments. Here are some specific considerations:

  • Corrosion: Exposure to saltwater can lead to accelerated corrosion. Regularly rinsing the axles, especially after launching, helps mitigate this issue. Additionally, choosing galvanized or aluminum axles provides better resistance to corrosion.
  • Bearing Maintenance: Boat trailer axles often require more frequent bearing inspections and maintenance due to water exposure. Greasing the bearings before and after each trip is essential to prevent water intrusion and prolong bearing life.
  • Seals and Gaskets: Ensure that seals and gaskets are in good condition to prevent water from entering the hubs. Replace them if they show signs of wear or damage.
  • Proper Storage: Storing the boat trailer properly, preferably in a dry, covered area, can significantly extend the life of the axles and other components.
  • Regular Inspections: Periodic inspections of the entire axle assembly, including brakes, hubs, and wiring, are crucial for early detection of issues that could lead to axle failure.
  • Tire Maintenance: Proper tire care is essential. Check tire pressure, tread wear, and sidewall damage regularly, as underwater loading can stress trailer tires.
  • Brake System Checks: Ensure that the brake system is functioning correctly, especially if the trailer has brakes. Saltwater exposure can affect brake components.
  • Electrical System: Check and protect the electrical components to prevent corrosion and ensure that trailer lights and brakes work reliably.
  • Spare Parts: Carrying spare parts such as bearings, seals, and a spare tire is a good practice, especially for longer trips where servicing might not be readily available.

Boat trailer axles demand diligence in maintenance to extend their lifespan and ensure safe and trouble-free trips. Prevention and early intervention are key to addressing the challenges posed by the marine environment.

trailer axle

Can trailer axles be used in both recreational and commercial trailers?

Yes, trailer axles are versatile and can be used in both recreational and commercial trailers, but the choice of axle specifications and configurations may vary based on the trailer’s intended use:

Recreational Trailers:

1. Utility Trailers: Trailer axles are commonly used in utility trailers designed for personal use. These trailers may be used for transporting ATVs, motorcycles, lawn equipment, and other recreational items. Single or tandem axles are typical choices, depending on the load capacity needed.

2. Boat Trailers: Recreational boat trailers use trailer axles, usually with features like galvanized coatings to resist corrosion in marine environments. Tandem axles or multiple axles may be used to support the weight of larger boats.

3. Camper Trailers: Travel trailers and camper trailers employ trailer axles. These may range from smaller pop-up campers to larger RVs, each with axles suitable for their size and weight requirements.

4. Horse Trailers: Trailers for transporting horses typically use trailer axles with features designed for animal comfort and safety. Axle configurations depend on the number of horses and the trailer’s size.

Commercial Trailers:

1. Cargo Trailers: Commercial cargo trailers use trailer axles to transport goods. These trailers come in various sizes and axle configurations, from single axles for smaller cargo trailers to tandem or multi-axle setups for larger enclosed trailers.

2. Flatbed Trailers: Flatbed trailers for commercial use utilize trailer axles to transport oversized or heavy loads. Axle configurations and load capacities are designed to meet the demands of industrial applications.

3. Dump Trailers: Trailers used for dumping materials, such as construction debris or agricultural products, use trailer axles. These axles are often equipped with heavy-duty features to handle the rigors of frequent dumping.

4. Refrigerated Trailers: Refrigerated or reefer trailers used for transporting temperature-sensitive goods are equipped with trailer axles suitable for the weight and requirements of refrigeration systems.

5. Specialty Trailers: Various specialty trailers, such as car haulers, concession trailers, and equipment trailers, also rely on trailer axles tailored to their specific purposes.

In summary, trailer axles are adaptable and can serve in both recreational and commercial trailer applications. However, it’s essential to select the right axle type, configuration, and specifications to match the trailer’s intended use, load capacity, and environmental conditions.

trailer axle

Are there different weight capacities for trailer axles depending on the trailer type?

Yes, trailer axles come in various weight capacities, and the capacity depends on the specific trailer type and its intended use. Here are some common weight capacities for different trailer types:

1. Utility Trailers:

– Utility trailers often have single axles with weight capacities ranging from 1,000 to 3,500 pounds. These trailers are used for light-duty hauling and general-purpose applications.

2. Boat Trailers:

– Boat trailers can vary widely in weight capacity based on the size of the boat they are designed to carry. Smaller boat trailers may have weight capacities of 3,000 to 5,000 pounds, while larger ones can exceed 10,000 pounds.

3. Enclosed Trailers:

– Enclosed trailers, used for transporting cargo, merchandise, or personal items, can have weight capacities from 2,000 to 12,000 pounds or more, depending on their size and construction.

4. Flatbed Trailers:

– Flatbed trailers are available in various weight capacities to accommodate different cargo loads. Common capacities include 7,000, 10,000, and 14,000 pounds, among others.

5. Dump Trailers:

– Dump trailers, designed for hauling materials like gravel or construction debris, may have weight capacities ranging from 5,000 to 20,000 pounds, or even higher for heavy-duty models.

6. Car Hauler Trailers:

– Car hauler trailers, used to transport vehicles, typically have weight capacities of 7,000 to 14,000 pounds, depending on the number of axles and the size of the trailer.

7. Gooseneck Trailers:

– Gooseneck trailers are heavy-duty and often used for transporting large equipment or livestock. Their weight capacities can range from 10,000 to 30,000 pounds or more.

8. Specialty Trailers:

– Specialty trailers, such as equipment trailers, horse trailers, and concession trailers, have weight capacities tailored to their specific purposes and design.

– It’s crucial to select a trailer with an axle and weight capacity that matches the intended load. Overloading a trailer can lead to safety risks, damage to the trailer, and legal issues. Manufacturers provide weight ratings and guidelines for each trailer type to help buyers choose the right option for their needs.

China Custom Trailer Axle American Type Axle Container Trailer   axle shaftChina Custom Trailer Axle American Type Axle Container Trailer   axle shaft
editor by CX 2024-03-29

China high quality Car Carrier Trailer Heavy Duty Shaft and Electr Brake Parts Truck Disc Brake Axle axle car

Product Description

Product Parameters

If you have any questions, you can chat with me
Technical Parameter

Model

Max. Capacity
(T)

Total Length
(mm)

Wheel Track
(mm)

Plate spring spacing
(mm)

Brake
(mm)

Axle Tube
(mm)

Studs(mm)

P.C.D(mm)

DRGA10

10

~2215

1820

≥990

420*125

150*150

10*M22*1.5

287.75

DRGA13

13

~2115

1840

≥940

420*220

150*150

10*M27*1.5

287.75

DRGA13

13

~2185

1840

≥930

420*180

150*150

10*M20*1.5

287.75

DRGA13

13

~2185

1840

≥930

420*180

O127

10*M22*1.5

335

DRGA14

14

~2185

1850

≥930

420*220

150*150

10*M22*1.5

335

DRGA15

15

~2185

1850

≥940

420*180

O127

10*M22*1.5

335

DRGA15

15

~2185

1850

≥940

420*180

150*150

10*M22*1.5

335

DRGA16

16

~2185

1850

≥940

420*220

O127

10*M22*1.5

335

DRGA16

16

~2205

1850

≥940

420*220

150*150

10*M22*1.5

335

DRGA18

18

~2210

1850

≥940

420*220

150*150

10*M24*1.5

335

DRGA20

20

~2270

1850

≥940

420*220

150*150

10*M24*1.5

335

Noted:
1. The Trailer Axle track can be customized according to customer requirements
2. Axles can install ABS brake.
3. Axles can install Air brake chamber

Product Description

Strong one-piece or welded axle head, exceeding the industry standard for hardness and tensile strength.Stable and
reliable brake system with non-absestos brake linings.
1. Products Name: Trailer Axle Parts Standard Size 13T Axle
2. Axle Track: 1840mm
3.Axle Beam: Square 150mm/127mm Round 127mm
4. Product type:American,Germany and Europe type
5.Max.capacity you can choose:12T,13T,14T,15T,16T
6.Stud:10*M20*1.5
7.Material: Steel
8.Products Capacity Available: 13T/14T/16T/18T/20T

Detailed Photos

1. Axle Body Advantage: Axle tube is made of high-quality alloy steel with a special process, high strength and lightweight, and the 2 ends of the tube body have good coaxially. 2. Brake Advantage: Brake Shoes Holder 6 hole boring machine using 6 completed a one-time processing, high processing, high
position precision, asbestos free friction plate, in line with international environmental standards.
3. Quality Assurance:
1). The axle tube assured 1 year or 150000 km.
2). The brake assy and bearings assured 3 months.
3). The Hubs and Drums assured 6 months.

Certifications

Packaging & Shipping

FAQ

Q1. Are you a factory or trading company?  

A: Yes,we are factory, but not only factory, we also have sales team, own technical team, own after-sale workshop, can help buyers to decide which products are their suitable choice, and all your inquiry will be replyed within 24 hours.

Q2. Could you send me all your catalogues and price list?
A: Please inform me the items, size and packages you are interested in, so we can offer you the price list you need for your reference .

Q3. How does your factory do regarding quality control? 
A: Our factory has passed ISO/TS16949, CCC, DOT, ISO, CE Certificate.

Q4. What’s your Delivery Time?
A: In generally, the delivery time is 10 days-15 days after receiving payment. For large quantity it will be checked  with production dept. We will make the delivery as soon as possible with the guaranted quality.

Q5. What is payment terms?
A: L/C, T/T, Western Union, and Alibaba Trade Assurance are all accepted, and if you have better idea, please feel free to share with us.

Q6. Which documents can you supply?
A: We usually provide our customers with Commercial Invoice, Price List, Packing List, Origin Certificate, Quality/Quantity Certificate, Beneficary’s Certificate, B/L and others as your request.
You can connect with us through any contact information. Our personalized service person will respond to you within 24 hours.
We have a third-party certification agency, and each product will be certified by the relevant inspection department. Let every user buy with confidence. Once you cooperate, you become a lifelong friend! Welcome to my hometown, we have airport pick-up service and accommodation arrangements. Factory tour anytime! CZPT Truck welcomes you!

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24-Hour Tracking Service
Warranty: 12month
Type: Axle
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Order Sample

The short shaft and brake hub are both forged with
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

trailer axle

What are the legal regulations or guidelines regarding trailer axle weight limits?

Trailer axle weight limits are subject to legal regulations that vary by region and are designed to ensure road safety and preserve infrastructure. Here are some common guidelines:

  • Maximum Weight Limits: Most regions specify the maximum allowable weight on a single axle, tandem axles, or multi-axle configurations.
  • Gross Vehicle Weight Rating (GVWR): Trailers are assigned a GVWR, indicating the maximum weight they can legally carry, including cargo and the trailer’s own weight.
  • Per-Axle Weight Limits: Legal limits restrict the weight any single axle or axle group can carry. These limits can vary by axle spacing.
  • Weight Distribution: Regulations often require proper weight distribution between axles to prevent overloading a particular axle.
  • Permits for Oversized Loads: Transporting loads exceeding standard weight limits may require special permits and adherence to specific regulations.
  • Axle Spacings: Legal restrictions may govern the distance between axles or axle groups, affecting weight distribution.
  • Tire Load Ratings: Trailer tires must meet or exceed the expected load, and tire ratings impact weight limits.
  • State and Local Regulations: In the United States, weight limits can vary by state and locality, so it’s important to be aware of and comply with local laws.

It’s crucial for trailer owners and operators to understand and adhere to these regulations to ensure safe and legal operation. Non-compliance can result in fines, road safety hazards, and damage to roads and bridges.

trailer axle

Can trailer axles be used in both recreational and commercial trailers?

Yes, trailer axles are versatile and can be used in both recreational and commercial trailers, but the choice of axle specifications and configurations may vary based on the trailer’s intended use:

Recreational Trailers:

1. Utility Trailers: Trailer axles are commonly used in utility trailers designed for personal use. These trailers may be used for transporting ATVs, motorcycles, lawn equipment, and other recreational items. Single or tandem axles are typical choices, depending on the load capacity needed.

2. Boat Trailers: Recreational boat trailers use trailer axles, usually with features like galvanized coatings to resist corrosion in marine environments. Tandem axles or multiple axles may be used to support the weight of larger boats.

3. Camper Trailers: Travel trailers and camper trailers employ trailer axles. These may range from smaller pop-up campers to larger RVs, each with axles suitable for their size and weight requirements.

4. Horse Trailers: Trailers for transporting horses typically use trailer axles with features designed for animal comfort and safety. Axle configurations depend on the number of horses and the trailer’s size.

Commercial Trailers:

1. Cargo Trailers: Commercial cargo trailers use trailer axles to transport goods. These trailers come in various sizes and axle configurations, from single axles for smaller cargo trailers to tandem or multi-axle setups for larger enclosed trailers.

2. Flatbed Trailers: Flatbed trailers for commercial use utilize trailer axles to transport oversized or heavy loads. Axle configurations and load capacities are designed to meet the demands of industrial applications.

3. Dump Trailers: Trailers used for dumping materials, such as construction debris or agricultural products, use trailer axles. These axles are often equipped with heavy-duty features to handle the rigors of frequent dumping.

4. Refrigerated Trailers: Refrigerated or reefer trailers used for transporting temperature-sensitive goods are equipped with trailer axles suitable for the weight and requirements of refrigeration systems.

5. Specialty Trailers: Various specialty trailers, such as car haulers, concession trailers, and equipment trailers, also rely on trailer axles tailored to their specific purposes.

In summary, trailer axles are adaptable and can serve in both recreational and commercial trailer applications. However, it’s essential to select the right axle type, configuration, and specifications to match the trailer’s intended use, load capacity, and environmental conditions.

trailer axle

What are the components of a trailer axle assembly and their functions?

A trailer axle assembly consists of several key components, each with specific functions:

1. Axle Beam:

– The axle beam is the central load-bearing component. It supports the trailer’s weight and distributes it to the wheels. The axle beam is the main structural element of the assembly.

2. Spindles:

– Spindles are the attachment points for the wheels. They connect the wheels to the axle beam, allowing them to rotate. Properly lubricated spindles ensure smooth wheel movement.

3. Hubs and Bearings:

– Hubs are the wheel-mounting components, and bearings allow the wheels to rotate freely. These components are crucial for reducing friction and maintaining wheel movement.

4. Brakes (Optional):

– Some trailer axles are equipped with brakes, including electric or hydraulic systems. Brakes help the trailer come to a controlled stop and enhance safety during towing.

5. Suspension System:

– The suspension system, which can be leaf springs, torsion axles, or air suspension, absorbs shocks and vibrations, ensuring a smoother ride and protecting the trailer’s cargo.

6. U-Bolts and Plates:

– U-bolts secure the axle assembly to the trailer’s frame using axle plates. They ensure proper alignment and stability of the axle assembly.

7. Mounting Hardware:

– Various nuts, bolts, and washers are used to secure components in the axle assembly, ensuring they remain in place during operation.

8. Axle Beam Brackets:

– These brackets provide additional support and structural integrity to the axle beam, helping distribute weight evenly and reduce stress on the axle.

9. Wiring and Connectors (Optional):

– If the axle assembly includes brakes, it may also have wiring and connectors for brake activation. These components allow the trailer’s braking system to communicate with the towing vehicle.

– In summary, the components of a trailer axle assembly work together to support the trailer’s weight, facilitate wheel movement, provide braking capabilities (if equipped), and ensure a smooth and stable ride. Proper maintenance of these components is essential for safe and reliable trailer operation.

China high quality Car Carrier Trailer Heavy Duty Shaft and Electr Brake Parts Truck Disc Brake Axle   axle carChina high quality Car Carrier Trailer Heavy Duty Shaft and Electr Brake Parts Truck Disc Brake Axle   axle car
editor by CX 2024-03-03

China manufacturer Disc Brake Axle Trailer Axle axle shaft

Product Description


Product Description:

1. we are manufacturer which can manufacture as your request
2. SGS/ISO/TS16949
3. Factory prices

Introduction of enterprise:

HangZhou Jinlibo Trade Co.,Ltd.has introduced sophisticated equipment from overseas to develop and manufacture semi-trailer axles and related parts.Holding ISO9001:2000 certification for our management system,we faithfully follow the stipulations of this standard so as to guarantee high product quality.

Characteristics:

1.Special heat-treat,low-alloy steel axle beam,it has the vitues of good synthetic performance,strong load ability and lower self weight.

2.High quality alloy solid inserted spindle,through wholy heat treatment,provide superior fatigue capability.

3.High performance premium non-asbestos brake linings,estend serbice life.

4.Easy for ABS installation.

5.Camshaft,matching with special seals,can ensure no entry of the grease into the brake drum,more safety.

6.New tight fit hub cap habe O rings,high property for sealing.

7.Grease lubricant is supplied by Mobil that lengthens the time of free maintenance.

8.Full range of stud fixing such as ISO,BSF and JAP,it can meet the requirements of various wheel rims.

Scope of our business

1.axles (German type axle,English type axle,American type axle,Spoke axle,ZM axle,Agriculture axle,Half axle,Axle without brake) 

2.Suspension (Bogie suspension,One point suspension,Rigid suspension,Spoke suspension,Machinery suspension)

3.Landing gear 

4.Fifth wheel (2”  3.5”) 

5.King pin (2”  3.5”)

6.Semi trailer 

7.Other axles and related parts (Low bed axle,hub,rims,spring,drum…) 

Packing:
1.in bulk or as request
2.usually 1 20 feet contaiber can load 58 sets axles

FAQ:
Q1:Are you a factory?
 
A:Yes,we are a factory,but not just a factory,as we have sales team,our own offices,and they
all can help the buyers and cooperative partners to decide which products are the best choices
for them,and all your requirements and inquires will be replyed in time.
  
Q2:What’s your Delivery Time?
A:In general, the delivery time is 15-20 days.We will make the delivery as soon as possible with
the guaranted quality.
 
Q3:What is the convenient way to pay?
A:L/C , T/T,Unionpay,DP are accepted,and if you have a better idea , please be free sharing with us.
 
Q4:Which type of shipping would be better?
A:Generally,in consideration of the cheap and safe superiorities of sea transportation,we advice to make delivery by sea.What’s more, we respect your views of other transportation as well.

 
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Axle Number: 1
Application: Trailer
Certification: ISO, Ts16949
Material: Steel
Type: Semi-Trailer
Samples:
US$ 750/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

Where can I find information on axle load limits for various types of vehicles?

When seeking information on axle load limits for different types of vehicles, there are several reliable sources where you can find the necessary information. Here’s a detailed explanation of where you can find information on axle load limits:

1. Vehicle Owner’s Manual:

The first and most accessible source of information on axle load limits is the vehicle owner’s manual. The owner’s manual provided by the vehicle manufacturer typically includes important details about the vehicle’s specifications, including axle load limits. Look for sections related to vehicle loading, weight distribution, or axle specifications to find the recommended load limits for each axle of your specific vehicle model.

2. Government Transportation Authorities:

Government transportation authorities, such as departments of transportation or road transport authorities, often provide guidelines and regulations regarding vehicle weight limits, including axle load limits. These authorities establish and enforce weight restrictions to ensure road safety and prevent damage to infrastructure. Visit the website of your local or national transportation authority to access relevant regulations or guidelines pertaining to axle load limits for various types of vehicles.

3. Commercial Vehicle Regulations:

If you are specifically interested in axle load limits for commercial vehicles, such as trucks or buses, consult the commercial vehicle regulations applicable in your region. These regulations are established to ensure safe and efficient operation of commercial vehicles on public roads. Regulatory bodies responsible for commercial vehicle operations often provide detailed information on axle load limits, weight distribution requirements, and other related specifications.

4. Vehicle Manufacturer or Dealer:

If you require axle load limit information for a specific vehicle model or variant, contacting the vehicle manufacturer or a local authorized dealer can be helpful. They can provide accurate and up-to-date information specific to your vehicle. Provide them with the vehicle identification number (VIN) or other relevant details to ensure they can assist you accurately.

5. Online Resources and Databases:

There are online resources and databases dedicated to providing information on vehicle specifications, including axle load limits. These resources may include vehicle data websites, forums, or government databases that compile and provide access to vehicle specifications and regulatory information. Conduct an internet search using relevant keywords to find reliable online sources that offer information on axle load limits for various types of vehicles.

When seeking information on axle load limits, it’s crucial to ensure that the information you obtain is accurate, up-to-date, and applicable to your specific vehicle and jurisdiction. Regulations and load limits can vary depending on the country, region, vehicle type, and other factors. Therefore, it is advisable to consult official sources or seek professional advice to ensure compliance with applicable regulations and ensure safe and legal operation of your vehicle.

axle

Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?

Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:

  1. Regular Inspection:
  2. Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.

  3. Lubrication:
  4. Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.

  5. Seal Inspection and Replacement:
  6. Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.

  7. Proper Loading and Towing:
  8. Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.

  9. Driving Techniques:
  10. Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.

  11. Regular Wheel Alignment:
  12. Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.

  13. Proper Tire Inflation:
  14. Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.

  15. Service Intervals:
  16. Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.

It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.

axle

How do solid axles differ from independent axles in terms of performance?

When comparing solid axles and independent axles in terms of performance, there are several key differences to consider. Both types of axles have their advantages and disadvantages, and their suitability depends on the specific application and desired performance characteristics. Here’s a comparison of solid axles and independent axles:

Aspect Solid Axles Independent Axles
Load-Bearing Capability Solid axles have high load-bearing capability due to their robust and sturdy construction. They can handle heavy loads and provide excellent stability, making them suitable for off-road vehicles, heavy-duty trucks, and towing applications. Independent axles typically have lower load-bearing capability compared to solid axles. They are designed for lighter loads and offer improved ride comfort and handling characteristics. They are commonly used in passenger cars, sports cars, and vehicles with a focus on maneuverability and road performance.
Wheel Articulation Solid axles have limited wheel articulation due to their connected and rigid design. This can result in reduced traction and compromised wheel contact with the ground on uneven terrain. However, solid axles provide excellent traction in situations where the weight distribution on all wheels needs to be maintained, such as in off-road or rock-crawling applications. Independent axles offer greater wheel articulation as each wheel can move independently of the others. This allows the wheels to better conform to uneven terrain, maximizing traction and maintaining contact with the ground. Independent axles provide improved off-road capability, enhanced handling, and better ride comfort.
Ride Comfort Due to their rigid design, solid axles generally provide a stiffer and less compliant ride compared to independent axles. They transmit more road shocks and vibrations to the vehicle’s occupants, resulting in a rougher ride quality. Independent axles are known for providing better ride comfort. Each wheel can react independently to road imperfections, absorbing shocks and vibrations more effectively. This leads to a smoother and more comfortable ride, particularly on paved roads and surfaces with minor irregularities.
Handling and Stability Solid axles offer excellent stability due to their connected nature. They provide better resistance to lateral forces, making them suitable for high-speed stability and towing applications. However, the rigid axle design can limit overall handling and maneuverability, particularly in tight corners or during quick direction changes. Independent axles generally offer improved handling and maneuverability. Each wheel can react independently to steering inputs, allowing for better cornering performance and agility. Independent axles are commonly found in vehicles where precise handling and responsive steering are desired, such as sports cars and performance-oriented vehicles.
Maintenance and Repair Solid axles are relatively simpler in design and have fewer moving parts, making them easier to maintain and repair. They are often more resistant to damage and require less frequent servicing. However, if a component within the axle assembly fails, the entire axle may need to be replaced. Independent axles are typically more complex in design and have multiple moving parts, such as control arms, CV joints, or bearings. This complexity can result in higher maintenance and repair costs. However, if a failure occurs, only the affected component needs to be replaced, reducing repair expenses compared to replacing the entire axle.

It’s important to note that advancements in suspension and axle technologies have resulted in various hybrid systems that combine features of solid and independent axles. These systems aim to provide a balance between load-bearing capability, wheel articulation, ride comfort, and handling performance based on specific application requirements.

In summary, solid axles excel in load-bearing capability, stability, and durability, making them suitable for heavy-duty applications and off-road conditions. Independent axles offer improved ride comfort, better wheel articulation, enhanced handling, and maneuverability, making them suitable for passenger cars and vehicles focused on road performance. The choice between solid axles and independent axles depends on the specific needs and priorities of the vehicle or machinery.

China manufacturer Disc Brake Axle Trailer Axle   axle shaftChina manufacturer Disc Brake Axle Trailer Axle   axle shaft
editor by CX 2024-03-02

China best One-Stop Shopping 13000kg 1840mm Square Beam Ameriacn Germany Type Shaft Force Steering Trailer Axle (08) axle definition

Product Description

 

Company Profile

 

HangZhou Hilite Auto Parts Co., Ltd., Established In 2012, Professional Chinese Supplier Of Trailer Parts, Truck Parts And Agricultural Vehicle Parts. We Are a Professional & Modern Company Who Specializes In R&D, Production And Sales Of Leaf Spring ,Axles, Suspension,Brake System(Relay Valve,Abs…),Tank Trailer Accessories,Etc.

Our Advantages

 

Our Products Are Mainly Sold To Southeast Asia, Europe, Central And South America, The Middle East And Africa. Our Value Is To Gain More Market Share By Profit&Value Delivery Our Customers And Partners. CZPT Parts is Compatible with BP / Fw Accessories, Can Be Couple with SINOTRUCK/BENZ/FAW/XIHU (WEST LAKE) DIS.FENG… Trucks & Trailers. CZPT Is Committed To Providing Customer With Professional And Precise Services, High-Quality Products with Sufficient Experiecne. 

OEM & Packing

 

Product Description

Axle Type Max Capacity(t) Track(mm) Brake
(mm)
Spring Seat Installation Axle Beam
(mm)
Centre Distance Of Brake Chamber(mm) Wheel Fixing Total Length
(mm)
Recommend Wheel Axle Wright
(kg)
Stud (ISO) P.C.D(mm) H(mm)
HLT-3AC5-8 8 1850 420*150 ≥1080 127 428 10*M22*1.5 335 280.8 ~2145 7.5V-20 323
HLT-3AC5-10 13 1840 420*180 ≥970 127 380 10*M22*1.5  335 280.8 ~2180 7.5V-20 342
HLT-3AC5-10 13 1840 420*180 ≥930 150 380 10*M22*1.5  335 280.8 ~2180 7.5V-20 340
HLT-3AC5-11 14 1840 420*220 ≥930 150 340 10*M22*1.5  335 280.8 ~2180 7.5V-20 358
HLT-3AC5-11 15 1850 420*180 ≥940 150 390 10*M22*1.5  335 280.8 ~2200 8.0V-20 370
HLT-3AC5-11 16 1850 420*220 ≥940 150 350 10*M22*1.5  335 280.8 ~2200 8.0V-20 388
HLT-3AC5-12 20 1850 420*220 ≥940 150 345 10*M24*1.5  335 280.8 ~2247 8.0V-20 430
HLT-3AC5-12 25 1850 420*220 ≥940 150 340 10*M24*1.5  335 280.8 ~2215 8.0V-20 474

CZPT Specializes In R&D, Production And Sales Of Auto Leaf Springs, American &German Axles, Leaf Spring Suspensions, Air Suspensions, Hydraulic Suspensions, Rigid Suspensions And Other Types Of Suspensions, Single/Double Landing Gear, Electric Landing Gear, Hydraulic Landing Gear And Various Types Of Landing Gear , As Well As Tank Trailer Accessories Such As Manhole Covers, Discharge Valves, Subsea Valves, Etc. 500,000+ Types, One Stop Shopping For All.

Quality Comparasion

Superior One-Piece Low-Alloy Axle Tube, Strong Carrying Capacity & High Bending Strength. 
Hardening And Tempering As a Whole, Cnc Machining.
Brake Linings, Environment-Friendly Andnon-Asbestos, Wear Life Increased 25%.
Xhp Mobil Grease To Lengthenmaintenance-Free Time.
Bearing Is Designed For Heavy-Dutyvehicles, Famous Domestic Brand.
. Interchangeable Brake Components Ands-Camshaft Make Brake Action More Flexible.

Certifications

 

CZPT Provide Guaranteed Services For All Products, Respect And Pay Attention To The Opinions Of Customers And Partners, Including Customizing And Developing New Products According To Customers’ Requirements, Believing Customer Satisfaction Is Our CZPT Pursuit. More Than 76% Of The Customers Who Have Used Hilite Products Have Become Our Loyal Customers, Who Have Established An Incredible Brand Effect For Us In The Local Area.

Factory View

 

We Would Like To Cooperate With You To Create More New Bonds In The Future.

FAQ

1Q: CAN YOU DESIGN AND PRODUCE THE PRODUCTS WE WANT?

A:We Have Rich Experience And Strong Technical Support To Design And Produce By Your Samples Or Drawings.Warmly Welcomed For Your Samples Or Drawing.

2Q:WHAT’S THE PROCESS OF PURCHASING ORDERS FROM YOU? 
A:1.Send Us Your Specific Demand,Such As Oem Numbers, Photos, Trailer Models,Ect. 
2.Confirm Our Quotation With Photos And Other Detials.
3.Negotiate About All Details You Need: Packing, Delivery Terms,Warranty, Ect. 
4.Sign The Contract For The Payment,We Will Make The Production On Time.

3Q.WHAT IS YOUR TERMS OF PAYMENT?
A: T/T 30% As Deposit, And 70% Before Delivery. 
L/C,T/T,D/P, Western Union,Paypal,Money Gram, Others
Photos And Videos Of The Products Will Be Provided Before Your Balance Payment.

4Q :WE WANT TO TRY IN A SMALL QUANTITY AS TRIAL ORDER,BUT LESS THAN YOUR MOQ. WHAT IS YOUR POLICY?
Sample Test And Sample Orders Could Be Accepted If We Have Ready Parts In Stock. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 12 Months
Condition: New
Axle Number: 1
Application: Trailer
Certification: ISO, CCC BV SGS TUV
Material: Steel
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

trailer axle

Are there specific challenges or maintenance practices for boat trailer axles?

Boat trailer axles come with unique challenges and maintenance requirements due to their exposure to marine environments. Here are some specific considerations:

  • Corrosion: Exposure to saltwater can lead to accelerated corrosion. Regularly rinsing the axles, especially after launching, helps mitigate this issue. Additionally, choosing galvanized or aluminum axles provides better resistance to corrosion.
  • Bearing Maintenance: Boat trailer axles often require more frequent bearing inspections and maintenance due to water exposure. Greasing the bearings before and after each trip is essential to prevent water intrusion and prolong bearing life.
  • Seals and Gaskets: Ensure that seals and gaskets are in good condition to prevent water from entering the hubs. Replace them if they show signs of wear or damage.
  • Proper Storage: Storing the boat trailer properly, preferably in a dry, covered area, can significantly extend the life of the axles and other components.
  • Regular Inspections: Periodic inspections of the entire axle assembly, including brakes, hubs, and wiring, are crucial for early detection of issues that could lead to axle failure.
  • Tire Maintenance: Proper tire care is essential. Check tire pressure, tread wear, and sidewall damage regularly, as underwater loading can stress trailer tires.
  • Brake System Checks: Ensure that the brake system is functioning correctly, especially if the trailer has brakes. Saltwater exposure can affect brake components.
  • Electrical System: Check and protect the electrical components to prevent corrosion and ensure that trailer lights and brakes work reliably.
  • Spare Parts: Carrying spare parts such as bearings, seals, and a spare tire is a good practice, especially for longer trips where servicing might not be readily available.

Boat trailer axles demand diligence in maintenance to extend their lifespan and ensure safe and trouble-free trips. Prevention and early intervention are key to addressing the challenges posed by the marine environment.

trailer axle

What is the impact of trailer axle alignment on tire wear and performance?

Proper trailer axle alignment is crucial for tire wear and overall performance. Misaligned axles can lead to a range of issues:

1. Uneven Tire Wear:

– Axle misalignment can cause tires to wear unevenly. For example, excessive toe-in or toe-out (the angle of the tires relative to the trailer’s centerline) can lead to premature wear on the inner or outer edges of the tires. This not only reduces tire lifespan but also affects handling and safety.

2. Reduced Fuel Efficiency:

– Misaligned axles increase rolling resistance, which requires more energy to move the trailer. As a result, fuel efficiency can decrease, leading to higher operating costs.

3. Handling and Stability Issues:

– Axle misalignment can result in poor handling and reduced stability. Trailers may become more difficult to control, especially during braking and cornering, posing safety risks.

4. Overloading and Weight Distribution Problems:

– Misalignment can affect weight distribution. It may cause excessive weight on one axle, leading to overloading and potential legal issues. Balanced weight distribution is vital for safe and legal towing.

5. Axle Stress and Damage:

– Misalignment places additional stress on axles and suspension components. Over time, this stress can lead to component damage, potentially causing breakdowns and expensive repairs.

6. Trailer Drift:

– Misalignment can cause the trailer to drift or pull to one side, making it challenging to maintain a straight course, especially when driving at highway speeds.

7. Reduced Tire Lifespan:

– The combination of uneven tire wear, increased rolling resistance, and handling issues can significantly reduce the lifespan of trailer tires. This results in more frequent and costly tire replacements.

8. Safety Concerns:

– A misaligned trailer is less stable and more difficult to control, increasing the risk of accidents and compromising safety.

Alignment Solutions:

– To address axle misalignment, it’s essential to have the trailer inspected by a qualified technician. They can adjust the alignment by modifying the axle’s position and orientation. Precision alignment equipment is often used to ensure accuracy.

– Regular alignment checks and adjustments, as part of routine maintenance, can help prevent these issues and promote even tire wear and better performance.

– Properly aligned axles improve handling, safety, and tire longevity, making it a critical aspect of trailer maintenance.

trailer axle

How do trailer axles contribute to the stability and safety of a trailer?

Trailer axles play a critical role in ensuring the stability and safety of a trailer in various ways:

1. Weight Distribution:

– Trailer axles are strategically positioned to distribute the weight of the trailer and its cargo evenly. Proper weight distribution prevents overloading on one side, reducing the risk of swaying and instability during towing.

2. Load-Bearing Capacity:

– The load-bearing capacity of trailer axles is designed to support the weight of the trailer and its contents. Properly rated axles ensure that the trailer remains stable and doesn’t become overloaded, which can lead to accidents.

3. Handling and Maneuverability:

– The alignment and suspension of trailer axles impact the trailer’s handling and maneuverability. Well-balanced axles and properly adjusted suspension contribute to predictable and safe towing, especially during turns and lane changes.

4. Braking Control:

– Many trailer axles are equipped with braking systems, which enhance the trailer’s braking control. This is crucial for maintaining a safe following distance and preventing rear-end collisions when the towing vehicle brakes.

5. Suspension Systems:

– The suspension system of trailer axles, such as leaf springs or torsion systems, helps absorb shocks and vibrations. This contributes to a smoother ride and reduces the risk of cargo shifting or damage during transit.

6. Tire Stability:

– Trailer axles support the trailer’s tires, ensuring they make even contact with the road surface. This promotes tire stability and longevity, reducing the risk of blowouts or tire-related accidents.

7. Towing Vehicle Compatibility:

– Trailer axles are selected based on the towing vehicle’s capacity. Matching the axle’s capacity to the towing vehicle’s capabilities ensures a safe and stable towing experience.

8. Anti-Sway Mechanisms:

– Some trailer axles incorporate anti-sway mechanisms to reduce trailer sway caused by external factors like wind or uneven road surfaces. These mechanisms enhance safety and control while towing.

9. Compliance with Regulations:

– Trailer axles must meet safety and weight regulations. Ensuring compliance with these standards is crucial for safe and legal trailer operation.

– In summary, trailer axles are integral to the stability and safety of a trailer. Properly maintained and correctly rated axles, along with appropriate suspension and braking systems, are essential for safe towing, preventing accidents, and protecting both the trailer and its cargo.

China best One-Stop Shopping 13000kg 1840mm Square Beam Ameriacn Germany Type Shaft Force Steering Trailer Axle (08)   axle definitionChina best One-Stop Shopping 13000kg 1840mm Square Beam Ameriacn Germany Type Shaft Force Steering Trailer Axle (08)   axle definition
editor by CX 2024-03-01